How to remove part of an image in photoshop

how to remove part of an image in photoshop

Adobe Photoshop

Feb 06,  · Drag over the wire to remove it from view. Tip: If the wire is straight, you may be able to remove it all at once by clicking one end of the wire, releasing your mouse, and Shift-clicking the other end of the wire. Use the Healing Brush tool if you need more control. Open an image that contains something you want to remove. Use the selection tool of your choice to select the element that you want to remove. You don’t have to be super-precise, so feel free to grab the Lasso tool. When you make your selection, be careful not to cut off any portion of your element.

The Eraser tool changes pixels to either the background color or to transparent. You can also use the eraser to return the affected area to a state selected in the History panel. A lower opacity erases pixels partially. See Paint tool options. Photoshop performs intelligent smoothing on your brush strokes. Simply enter a value for Smoothing in the Options bar when you're working with one of the following tools: Brush, Pencil, Mixer Brush, or Eraser.

A value of 0 is the same as legacy smoothing in earlier versions of Photoshop. Higher values apply increasing amounts of intelligent smoothing to your strokes. Stroke smoothing works in several modes. Clicking the gear icon to enable one or more of the following modes:. Pulled String Mode. Paints only when the string how to make funny photoshop pictures taut.

Cursor movements within the smoothing radius leave no mark. Stroke Catch Up. Allows the paint to continue catching up with your cursor while you've paused the stroke. Disabling this mode stops paint application as soon as the cursor movement stops.

Catch-Up On Stroke End. Adjust For Zoom. Prevents jittery strokes by adjusting smoothing. Decreases smoothing when you zoom in the document; increases smoothing when you zoom out. When you click in a layer with the Magic Eraser tool, the tool how to set up a toilet cam all similar pixels to transparent.

If you click in the background, it is converted to a layer and all similar pixels change to transparent. The Background Eraser tool erases pixels on a layer to transparency as you drag.

You can erase the background while maintaining the edges of an object in the foreground. By specifying different sampling and tolerance options, you can control the range of the transparency and the sharpness of the boundaries. Note: If you want to erase the background of an object with intricate or wispy edges, use QuickSelect. The background eraser samples the color in the center of the brush, also called the hotspot, and deletes that color wherever it appears inside the brush.

It also performs color extraction at the edges of any foreground objects, so that color halos are not visible if the foreground object is later pasted into another image.

Note: The background eraser overrides the lock transparency setting of a layer. The Auto Erase option for the Pencil tool lets you paint the background color over areas containing the foreground color.

If the center of the cursor is over the foreground color when you begin dragging, the area is erased to the background color. Legal Notices Online Privacy Policy. Buy now. Erase parts of an image Search. Adobe Photoshop User Guide. Select an article: Select an article:. Applies to: Adobe Photoshop. Erase with the Eraser tool. Select the Eraser tool.

Set the background color you want to apply if you are erasing in the background or a layer with locked transparency. In the options bar, choose a Mode setting. Brush and Pencil set the eraser to act like those tools.

Block is a hard-edged, fixed-sized square with no options for changing the opacity or flow. For Brush and Pencil modes, choose a brush preset, and set Opacity and Flow in the options bar.

To erase to a saved state or snapshot of the image, click the left column of the state or snapshot in the History panel, and then select Erase To History in the options bar. Drag through the area you want to erase. Stroke smoothing. Change similar pixels with the Magic Eraser tool. You can choose to erase contiguous pixels only or all similar pixels on the current layer.

Example of erasing similar pixels. Select the Magic Eraser tool. Do the following in the options bar:. Enter a tolerance value to define the range of colors that can be erased.

A low tolerance erases pixels within a range of color values very similar to the pixel you click. A high tolerance extends the range of colors that will be erased. Select Anti-aliased to smooth the edges of the area you erase. Select Contiguous to erase only pixels contiguous to the one you click, or deselect to erase all similar pixels in the image.

Select Sample All Layers to sample the erased color using combined data from all visible layers. Specify an opacity to define the strength of the erasure.

Click in the part of the layer you want to erase. Change pixels to transparent with the Background Eraser tool. In the Layers panel, select the layer containing the areas you want to erase. Select the Background Eraser tool. Choose Pen Pressure to base the variation on the pen pressure. Choose Stylus Wheel to base the variation on the position of the pen thumbwheel. Choose a Limits mode for erasing: Discontiguous to erase how to paint bathroom wall sampled color wherever it occurs under the brush; Contiguous to erase areas that contain the sampled color and are connected to one another; and Find Edges to erase connected areas containing the sampled color while better preserving the sharpness of shape edges.

For Tolerance, enter a value or drag the slider. A low tolerance limits erasure to areas that are very similar to the sampled color. A high tolerance erases a broader range of colors. Select Protect Foreground Color to prevent the erasure of areas that match the foreground color in the toolbox.

Choose a Sampling option: Continuous to sample colors continuously as you drag; Once to erase only areas containing the color you first click; and Background Swatch to what creatinine level requires dialysis only areas containing the current background color. Auto Erase with the Pencil tool. Specify foreground and background colors.

Select the Pencil tool. Select Auto Erase in the options bar. Drag over the image.

15 replies on “[Photoshop trick] How To Discard Certain Part of an Image”

Apr 20,  · While the hair is selected, you can use clone stamp tool to clone the unwanted portion of an image. That sums up the whole procedure. I hope that it will help you and from now on, hopefully you will follow this procedure more often in Photoshop and be an expert in this field in the future. Oct 16,  · Take the second photograph, as shown in the images below: (Edit: A longer than normal focal length lens seems to work best.) Then, in Photoshop: 1. Open both picture files. Put one image over the other by clicking on one image in the Layers panel and dragging the layer over the other image. Mar 12,  · In this video, you will learn how to remove anything from a photo in alldatingloveen.com will use three techniques that will allow you to remove distracting objects.

As you can see the below image, I am going to make the left image look like the image in the right. It looks like a difficult one but not only the Graphic Designer Anyone who knows Photoshop a bit will be able to edit the image as shown below, in just 2-steps. In below image I am going to discard certain part from the image without affecting its beauty. Try this out for yourself, and let me know if you like the tutorial please share your view through the comments.

I remember last time i edited a pic of mine that had a little garbage lying around that was ruining the beauty of the background hill top and the sky. I anyways cleaned it using MS paint painful, i know!

Thank you in advance! Nisha: Off course I can create a tutorial on How to cut and paste or merge images and changing of a background and that will be an interesting topic too.

Can you provide me more details exactly what do you want. If you have the image you can send me at my office Email ID: [email protected]. Can you please help me. Close Menu About. First take an image in Photoshop and copy the layer for backup. Select the part which you want to drain out from the image. You can use quick selection tool or Lasso tool to make selection, here I used Lasso tool. More Examples : Try this out for yourself, and let me know if you like the tutorial please share your view through the comments.

Now since i know this, it would be a piece of cake. Thanks for the post! Thank u Huzaifa…. And i will try to check them regularly. Have a nice time……. Which Photoshop version you are using? Photoshop CS3. It is available in photoshop cs5. About Contact.



More articles in this category:
<- What are some interesting facts about the sahara desert - What is arthritis in the knee joint->

4 thoughts on “How to remove part of an image in photoshop

Add a comment

Your email will not be published. Required fields are marked *

Back to top